How To Determine the Source of a Pool Leak in 5 Simple Steps

Dealing with a pool leak can be one of the biggest inconveniences you may ever find yourself in. Not only is the entire situation a mess, but it’s also a frustration in that you may not know where the pool leak is located or what the source may be. Of course, the quicker you make sense of why the leak is happening, the faster you can get pool liner replacement atlanta, GA (or wherever is more local to you) and overcome this stressful situation.

Below are some ways to find the source of a pool leak as quickly as possible.

1. Investigate Around the Pool

One of the first things you’re going to want to do when you suspect you have a pool leak is to look for signs around your pool for the source of the leak. Spotting signs can help you confirm the leak and rule out evaporation (which every pool is prone to).

Be on the lookout for cracks in surrounding tiles or concrete. Also look for evidence of the leak on the pool deck and in your yard. Puddling or muddy areas can indicate that there’s most likely a leak present and can help you pinpoint where it could be coming from.

2. Check the Equipment Pad

Another potential source of a pool leak would be at the equipment pad. Look for parts (e.g., pump, valve, filter, heater) failure or a broken connection seal, which can lead to water leaking into the equipment pad.

When checking the equipment pad, do be careful if there is exposed electrical present as it could be wet and result in a shock if touched.

3. Perform the Bucket Test

Not sure if your pool is truly leaking or the water is simply evaporating? The bucket test is a good idea to perform.

This test involves taking a 5-gallon bucket, filling it with pool water, and then marking the top of the water line with tape. Also place tape at the waterline of your pool. Over the next few days, measure the difference in the water levels between the bucket and the pool. If there’s a large difference between the two, this can confirm a water leak rather than evaporation.

4. Bust Out the Food Coloring

Once the leak has been confirmed, then it’s time to find the source. Use a special leak detection dye to help you take note of where the leak is occurring depending on the direction the dye is escaping. It’s advised to avoid using regular food coloring for this test as it can’t be filtered out of the pool.

5. Get an Expert on Board

Sometimes the best and fastest way to ensure you find the source of a pool leak quickly is to leave it to a professional. They can help take the headache out of searching for your leak and can offer speedy pool leak repair at your convenience. This way, you can get the situation resolved before it gets more detrimental.

Conclusion

A pool leak is nothing to be calm about. It’s a stressful circumstance that involves being quick on your feet to resolve. The good news is, there are simple steps to ensure you can find the source of a pool leak fast without much fuss, including the latter tips and tricks.